[. . . ] StudioLive Rack Ear Installation Instructions Step 1: Using a Philips screwdriver, remove the three screws beneath the decorative plastic side panel on the right side of your StudioLive. [. . . ] Remove the screw that attaches each of these clips to your StudioLive. It is recommended that you attach the clips back to the decorative side panel using the screws you removed in Step 1 to store them. Both the clips and screws are necessary to reattach the side panel. Step 4: Remove the four screws at the top. Set them aside and store them with the side panel. Step 5: Using the screws you removed from the metal clips in Step 3, attach the Rack Ear labeled `R' to your StudioLive. [. . . ] Thread these through the four holes at the top of the Right Rack Ear and attach them to your StudioLive. [. . . ]